CONTACTS 
0201 - Kwan Henmi Arch & Planng           415 626 6766
020101 - Mr. Denis Henmi; Principal
0202 - Chips & Tech.                      408 434 0600
020201 - Mr. Morris E. Jones
020202 - Vice President =Ext. 4283  car: 408 398 6004 Prodigy TBDG68A
020203 - Advanced Products =fax 434 0765

SUBJECTS
Kwan Henmi, SDS
Develop & Maintain Hardware System
930617
Loss of Data on Hard Disk
Printer
Font Downlading -- LF

0708 -    ..
0709 - Summary/Objective
0710 -
071001 - Installed updated software.  Updated autoexec.bat, by changing the
071002 - call to load DOS printer command to:
071003 -
071004 -                 printer.exe /d:com1
071005 -
071006 - This worked.
071007 -
071008 - Still have a problem loading the fonts, because fl.exe only seems to
071009 - work for lpt1.  I called Morris about it, and left message we need to
071010 - change that.
071011 -
071012 - Also need to laod the "j" macro, and modify 0450431, so it calls it
071013 - similar to what I did for Wayne, ref SDS 2 line 060701.
071014 -
071015 -
071016 - Looks like some Helps files are missing from Denis SDS program, pos-
071017 - sibly due to the system crashes that occurred when his hardware con-
071018 - sultant updated his system, see ref SDS 1 line 060630.
071019 -
071020 - What is happening is that when some Help cites are called, since they
071021 - are not on the disk, the program crashes.  The code is running cor-
071022 - rectly for those Help files that exist.
071023 -
071024 - I need to install Help in total again.
071025 -
071026 -
0711 -
0712 -
0713 - 2105 called Morris
0714 -
071401 - He will look for fl.exe code and try to develop a switch to load the
071402 - code over a specified port.
071403 -
071404 - I found his code under:
071405 -
071406 -                     c: 00 18 06
071407 -
071408 -
071409 -
0715 -
0716 -
0717 - 2255 Morris called back
0718 -
071801 - Had difficulty transferring via pcAnywhere.  The program kept
071802 - crashing, similar to what occurred with transfers to DNRC a few months
071803 - ago.  So tried the modem routine in Windows.  It is "Terminal" icon
071804 - under "Acessories" Morris helped me configure to his settings.  First
071805 - had to make settings for "communications" for com3.  When it opened
071806 - this option window the first time, com3, was not shown as available.
071807 - We then opened pcAnywhere configuration settings which show com3,
071808 - closed it, and then when Windows Settings for Communications was
071809 - opened, com3 was an option I could set.  We also had to set the com3
071810 - baud rate to 2400 in the "Port" window under "Control Panel".
071811 -
071812 - Transferred fl.c and fl.mak to Morris.  He examined the file, and
071813 - decided it would be pretty difficult to create switches to specify a
071814 - port.
071815 -
071816 - Decided to try changing fl.bat so it uses mode command to redirect
071817 - output to lpt1, to com1.
071818 -
071819 -
071820 -
071821 -        mode com1:9600,n,8,1
071822 -        mode lpt1=com1
071823 -        fl c:\SD\01\flist >nul
071824 -        mode lpt1
071825 -
071826 -
071827 -   ...we may not really need the mode com1:9600, etc., line.  It may
071828 -   already be in the autoexec.bat file, since when I tried printing
071829 -   today, it worked well.
071830 -
071831 -
071832 -
071833 -
071834 -
071835 -
0719 -
0720 -